Lock Installation & Rekey Cost — Real Prices, Quoted Before We Drive

Honest local price ranges for the job, and a firm number on the phone before anyone is dispatched. No teaser rate that doubles when the van arrives.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Smart locksSmart locks
House lockoutsHouse lockouts
Re-keyingRe-keying
Deadbolt upgradesDeadbolt upgrades
SchlageSchlage
KwiksetKwikset
Car keys & fobsCar keys & fobs
Every visit starts with

Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch

You get a price before we start. It does not change when we arrive. No surprises.

Get your free estimate
Explore

Styles & brands we work with

House lockouts
House lockouts
Re-keying
Re-keying
Deadbolt upgrades
Deadbolt upgrades
Smart locks
Smart locks
Schlage
Schlage
Kwikset
Kwikset
Car keys & fobs
Car keys & fobs

How Much Does Lock Installation & Rekey Cost in Arlington?

Lock installation and rekey pricing in Arlington, TX, typically runs $95 to $185 per lock for a standard rekey and $125 to $350 per lock installed, with high-security hardware like Medeco, Mul-T-Lock, and Abloy pushing install costs to $250 to $500 and up. Most single-family homes in Arlington only need four to six locks rekeyed, which lands a typical new-homeowner job between $240 and $495 all-in. High-security systems sit in a different tier entirely, and that spread is what this guide breaks down.

We’re Stalwart Locksmith, and rekeying is one of our three core services alongside emergency lockouts and automotive work. We work with eight hardware lines from Kwikset and Schlage up to Medeco, Mul-T-Lock, Sargent, and Abloy, so the quote you get reflects the lock you actually own, not whatever the truck happens to stock. Estimates are free, and you can call (877) 626-0257 for a same-day price.

Key Takeaways

  • A standard residential rekey in Arlington runs $95 to $185 per lock; the house-wide average lands around $280.
  • Installing a new Schlage or Kwikset deadbolt typically costs $125 to $350 installed; high-security Mul-T-Lock or Medeco is $250 to $500+.
  • Rekeying a house is almost always thousands cheaper than buying new hardware, and the security reset is the same.
  • Arlington’s new-build surge in north and south subdivisions is why we see so many matching-Kwikset jobs with builder-grade deadbolts from day one.
  • Free estimates and upfront pricing mean the range you’re quoted is what you pay: (877) 626-0257.

Lock Installation & Rekey Cost Breakdown (2026)

Here’s what our Arlington jobs actually bill out at. These are line items, not teaser rates: they cover labor, pins and springs on a rekey, and standard-grade hardware on an install. Prices are for one technician at one location during a normal business visit.

Arlington, TX lock installation and rekey pricing, 2026
Service Typical Range Notes
Rekey, one standard cylinder (Kwikset, Schlage) $95 – $185 Includes new pins and two keys
Rekey, whole house (4 – 6 locks) $240 – $495 Most common Arlington job
Install, standard deadbolt (Schlage or Kwikset) $125 – $350 Depends on door prep and strike plate
Install, entry knob plus deadbolt (matching set) $260 – $520 Baldwin and Yale sit toward the top
Install, high-security lock (Medeco, Mul-T-Lock, Abloy) $250 – $500+ Restricted-key, pick-resistant hardware
Rekey or install, commercial mortise or panic bar $175 – $600+ Sargent and heavy-duty grade; door count drives it
Extra copies of a standard key on site $5 – $12 each Restricted keys on high-security locks are higher
Smart lock install (Yale), customer-supplied hardware $150 – $300 Labor and app setup
Patch or replace a damaged strike or frame plate $60 – $180 Common on older Arlington doors

What pushes a quote up: heavy-duty hardware, restricted-key systems that need the buyer registered, doors that never had a deadbolt (so we’re boring a fresh hole), and multi-door commercial properties. What pulls it down: bringing the whole house to one key in a visit (the per-lock price drops), owning standard Kwikset or Schlage that most techs carry pins for, and scheduling during a normal workday instead of jumping into a locked-out Saturday.

What Affects Lock Installation & Rekey Pricing in Arlington

Arlington has its own patterns, and they show up in pricing more than most homeowners expect. Here’s what actually moves the number.

  • Lock brand and security tier. Kwikset and Schlage use standard pin tumbler cylinders that we can rekey on the spot. Medeco, Mul-T-Lock, and Abloy are pick-resistant and bump-resistant systems with restricted keys, and they need their own parts and their own paperwork. That’s a hardware jump, not a labor trick.
  • Number of locks and doors. One deadbolt is one price; a house with a front door, back door, garage entry, and side gate is a package. We price whole-house rekeys lower per lock because it’s one trip.
  • Door condition and prep. Arlington subdivisions built through the 1990s and 2000s sometimes have hollow-core rear doors and light frames where a deadbolt needs reinforcement. Homes along older corridors near downtown can need frame repair before a new lock seats right.
  • Whether a key is being matched. Rekeying the whole house to a single key (a “master key” setup) adds a small labor charge but saves the frustration of four different keys.
  • Residential vs. commercial grade. A commercial property with Sargent panic bars and several exterior doors is priced per opening, and code requirements around egress hardware add time.
  • Timing. A planned install during regular hours is the fairest price. Emergency lockout calls that turn into a rekey still get an honest quote on the spot, but the urgency carries its own cost, and we’ll tell you before any work starts.

If you’re trying to decide between a simple reset and a full hardware upgrade, our Lock Installation & Rekey in Arlington page walks through the difference door by door.

Install vs. Rekey: Which Costs Less in Arlington?

Rekeying almost always costs less. A standard rekey keeps your existing hardware and just changes the pins, so you pay labor and parts instead of new locks. Across Arlington, the swing is roughly $100 to $200 more per opening to install new hardware versus rekey what’s already there.

Here’s when “rekey, don’t replace” is the right call: you just bought the house or signed a lease and don’t know who has the old keys, a contractor or tenant kept a copy, or the existing hardware is a solid Kwikset or Schlage that’s still working. Here’s when installing makes sense: the locks are worn to the point of failing, you want keyed-alike matching across front, back, and garage, or you’re moving to a specialty system like a restricted-key Medeco for a rental property or a Mul-T-Lock on a commercial entry.

For high-security, the conversation changes. A pick-resistant system is a deliberate upgrade purchase, priced like one, and we treat the Medeco, Mul-T-Lock, and Abloy work as a specialty rather than a sideline. If you’re not sure which side of the line your house sits on, that’s exactly what a free estimate answers: (877) 626-0257.

Why Arlington Homeowners Rekey So Often

The reasons we get called in Arlington are pretty consistent, and a few of them are local.

  • New builds and resales. North Arlington and the subdivisions out toward the south and east are full of homes where the builder set up every door with the same key series. New homeowners call us after closing to change the pins on day one, and that’s a standard four-to-six lock job.
  • Renters changing tenants. In rental pockets around the Arlington entertainment district and the university area, landlords rekey between tenants to protect both sides. It’s cheaper than replacing hardware each time.
  • Family changes. A key that never came back, a breakup, a kid moving out: rekeying resets who can get in without buying a single new lock.
  • Commercial and small-business basics. Storefronts and offices along the major corridors get rekeyed when staff turn over or a key set goes missing. Commercial-grade hardware on multiple doors is a different animal, so it’s priced per opening.

Texas heat and North Texas humidity also do a number on door hardware. We regularly see deadbolts in Arlington that have stiffened or slipped out of alignment because the wood swelled and shrank through the seasons, which means a visit often turns into an install or adjustment rather than a straight rekey. Worth knowing before you assume the lock is failing; sometimes it’s the strike plate.

How to Save on Lock Installation & Rekey in Arlington

You don’t need to hunt for the cheapest number in town to save real money. A few smart decisions cut the bill without cutting corners.

  1. Rekey the whole house at once. One visit for four to six locks beats four separate trips, and we price it that way. Group every door: front, back, garage entry, side gate.
  2. Reuse what’s already quality. If your current locks are Schlage or Kwikset in good shape, rekeying them is the affordable reset. Buying new hardware for the same security level just adds cost.
  3. Ask for keyed-alike. Getting every door on one key with a small extra charge is often cheaper than the master-key route and easier to live with.
  4. Match the lock to the door. A high-security Medeco or Mul-T-Lock belongs on a main entry and a rental property; a standard Schlage on an interior door keeps the overall bill sane. We’ll tell you honestly where the upgrade pays off and where it doesn’t.
  5. Book before the emergency. A planned install during regular hours costs less than reacting to a lockout. If you’re already locked out, call us anyway, and we’ll quote before we start.
  6. Get a free estimate in writing. Upfront pricing means no surprises. We’ll confirm the range on the phone and hold it when we arrive.

Scheduling an install or whole-house rekey with a free estimate is the single cheapest move: (877) 626-0257.

FAQs – Lock Installation & Rekey Cost

How much does a rekey cost in Arlington?

A standard rekey in Arlington runs $95 to $185 per lock, and most whole-house jobs land between $240 and $495. High-security cylinders like Medeco or Mul-T-Lock cost more because the parts are restricted. Call (877) 626-0257 for an exact quote, and estimates are free.

Is it cheaper to rekey or replace a lock?

Rekeying is cheaper, typically $100 to $200 less per opening than installing new hardware. If your existing locks are decent Schlage or Kwikset in working order, rekey them. If the hardware is failing or you’re upgrading to a restricted-key system, install. Either way, we’ll tell you which is the better spend for your door.

How much does it cost to install a new deadbolt in Arlington?

Installing a standard deadbolt in Arlington generally costs $125 to $350, and a high-security system runs $250 to $500 or more. The price depends on the brand, the door prep, and whether the frame needs reinforcement. Call (877) 626-0257 and we’ll narrow it to your door.

Can you rekey my locks the same day in Arlington?

Often, yes. We keep emergency response as one of our core services, and a standard rekey or deadbolt install can frequently be handled in a single visit. We don’t promise a specific window before we’ve confirmed your job, so the honest answer is: call (877) 626-0257 and we’ll tell you what’s available today.

Why is high-security lock installation more expensive?

High-security hardware like Medeco, Abloy, and Mul-T-Lock costs more because of what’s inside: pick-resistant and bump-resistant mechanisms, patented restricted keyways, and keys that can’t be copied at a hardware store without authorization. You’re paying for a system, not a deadbolt, and the install takes more skill. We’ll quote it clearly up front, and a free estimate means no surprises: (877) 626-0257.

Get a Free, Up-Front Quote in Arlington

You don’t have to guess at the number. Rekeying is the affordable security reset, and a full install is worth it when the hardware is ready to go or you want a higher tier. Our estimates are free and our pricing is upfront, so you know what you’re paying before a tool comes out. Whether it’s one door or a whole property, call (877) 626-0257 for a free estimate, and head back to our home page if you want to see the full range of what we do.

Written by the team at Stalwart Locksmith, serving Arlington, TX. Pricing reflects the Arlington market as of 2026. Stalwart Locksmith offers free estimates – call (877) 626-0257.

What Our Customers Say

★★★★★ 4.7 from 7+ reviews

"Key snapped off in the deadbolt. He extracted it without damaging the cylinder, which I did not think was going to be possible."

— Steven Nguyen

"Told me over the phone that what I needed was a five dollar part from the hardware store, not a locksmith. I called him back a month later for real work because of that."

— Megan Schaefer

"Programmed a transponder key for a 2014 model that the dealership wanted an absurd amount for. Same key, fraction of the price, took him twenty minutes in my driveway."

— Heather Anderson
Need Locksmith help in Arlington? Licensed & insured · 30–60 min response · free estimates
Call (877) 626-0257

Request a Free Estimate

Tell us what's going on in Arlington — we'll get back to you fast. No obligation.

By requesting your free estimate, you acknowledge our Privacy Policy and consent to receive communications through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch