Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateStyles & brands we work with
How Much Does Commercial Locksmith Cost in Arlington?
Commercial locksmith work in Arlington runs $75 to $200 for a standard service call and rekey, while installing a new commercial-grade lockset typically lands between $150 and $450 per door. High-security systems from Medeco, Mul-T-Lock, or Abloy push a single door into the $350 to $1,100 range once hardware, restricted keys, and labor are counted. Most routine commercial jobs in Arlington – a rekey after a tenant moves out, a stuck panic bar, a fresh set of keys – fall somewhere under $500, and a master key system for a small office usually comes in between $600 and $2,400 depending on how many doors and users it covers.
Those numbers are our real working ranges for the Arlington market in 2026, not a national average pulled from a directory. Below we break down every line item, explain what moves the price up or down in this city, and show where you can save without cutting corners on security. If you want an exact figure for your building, call (877) 626-0257 – estimates are free, and we won’t charge you to tell you what a job actually costs.
Commercial Locksmith Cost Breakdown (2026)
Here’s what commercial locksmith work looks like line by line across Arlington buildings, from a strip center on Pioneer Parkway to a warehouse near the Arlington Municipal Airport. Pricing assumes standard business hours; after-hours and weekend dispatch adds a premium.
| Service | Typical Arlington Range (2026) | Notes |
|---|---|---|
| Service call / trip charge | $65 – $125 | Waived on some larger installs |
| Commercial rekey (per cylinder) | $25 – $60 | Per lock, not per building |
| Rekey, full small office (5-8 doors) | $200 – $500 | Cheaper than replacing hardware |
| Standard commercial lockset install | $150 – $450 per door | Schlage, Kwikset, Yale grade hardware |
| Heavy-duty mortise lock / exit device | $350 – $900 per door | Panic bars, fire-rated doors |
| High-security lock (Medeco, Mul-T-Lock, Abloy) | $350 – $1,100 per door | Pick- and bump-resistant, restricted keys |
| Master key system (small office) | $600 – $2,400 | Scales with doors and keyholders |
| Emergency lockout (business hours) | $95 – $200 | Access without damage |
| Emergency lockout (after hours) | $150 – $350 | Higher for late night, holidays |
| Key duplication (standard) | $5 – $15 each | Restricted keys cost more |
| Restricted / patented key cut | $25 – $75 each | Medeco, Mul-T-Lock, Abloy |
| Door closer or hardware adjustment | $90 – $250 | Common on retail entry doors |
The single biggest swing factor is hardware tier. A standard-grade commercial knob set and a Medeco high-security cylinder can differ by several hundred dollars on the same door, and that gap is real: the premium hardware is engineered to resist picking, bumping, and unauthorized key copying. Labor stays roughly similar; it’s the lock itself and the restricted key control that move the price. Door count matters too. A one-door suite is a quick stop, but an eight-door office park with a master key system is a half-day project with a written key schedule – and that changes how we quote it.
For a closer look at how we scope a full building, the Commercial Locksmith in Arlington page walks through the process from assessment to install. And if you’re still figuring out whether you need a locksmith or a general contractor, our home page lays out the three service lines we actually run: automotive, emergency response, and residential/commercial security.
What Affects Commercial Locksmith Pricing in Arlington
Arlington isn’t a generic market. The mix of older retail corridors, new-build office space, and industrial property near the airport means we see a wider spread of door types than you’d find in a single-district city. Here’s what actually moves the number.
- Hardware tier. Entry-level Schlage and Kwikset keep costs down; Baldwin, Sargent, Medeco, Mul-T-Lock, and Abloy sit at the premium end. We stock and service all eight, so we quote the tier your building needs rather than steering you to whatever’s on the truck.
- Door count and layout. One suite is a service call. A multi-tenant building with shared entries, back doors, and a master key hierarchy is a project. The more doors in the key system, the more time goes into cutting, coding, and documenting keys.
- Time of day. A lockout at 2 p.m. on a Tuesday costs less than the same lockout at 11 p.m. on a holiday. Emergency response is a core part of what we do, but after-hours dispatch carries a premium, and that’s standard across Arlington.
- Door type and condition. Hollow-metal storefront doors, fire-rated doors with panic hardware, and aged wood doors each demand different hardware and different install time. A door that’s been kicked or swollen from Texas heat and humidity can add labor to fit a new lockset cleanly.
- Key control requirements. Businesses that need restricted, patented keys – so only authorized people can get copies – pay more upfront but gain real accountability. That’s a Medeco, Mul-T-Lock, or Abloy conversation, and it’s often worth it for property managers and multi-tenant buildings.
- Whether you rekey or replace. Rekeying existing hardware is almost always cheaper than a full replacement. If the cylinders are sound, rekeying a whole floor can cost a fraction of new locksets and still delivers a clean security reset.
The climate deserves a mention because it genuinely affects hardware life in Arlington. Summer heat and humidity work on exterior doors and their hardware year after year. We regularly see sticking deadbolts, swollen door frames, and worn strike plates on west- and south-facing storefronts where the afternoon sun bakes the metal. That wear is a maintenance cost, not a locksmith upsell – catching it early with an adjustment is cheaper than a forced entry repair later.
How to Save on Commercial Locksmith Costs in Arlington
You don’t need to gamble on the cheapest bid to keep the bill sensible. A few deliberate choices bring commercial locksmith costs down without weakening security.
- Rekey instead of replace. When you take over a leased space or lose control of keys, rekeying the existing cylinders is the cost-smart move. It resets who has access for a fraction of new hardware. This is the “rekey, don’t replace” principle we build most tenant-change jobs around.
- Bundle the work. If several doors need attention, book them in one visit. One trip charge and one scheduling window beat five separate service calls every time.
- Plan the upgrade, don’t panic-buy it. A high-security system installed on a planned schedule costs less than an emergency retrofit after an incident. If you’re considering Medeco or Abloy, scope it before you need it.
- Keep a key schedule. Knowing which key opens which door saves diagnostic time on every future visit. We’ll help you document it as part of a master key job.
- Handle after-hours calls deliberately. If a lockout can safely wait until morning, it will cost less. If it can’t – a business that can’t open, a door that won’t secure overnight – call right away. Emergency response is exactly what we’re built for.
Free estimates are the simplest savings tool of all. Call (877) 626-0257 and we’ll give you a written range before any work starts, so there are no surprises when the invoice arrives. Upfront pricing isn’t a slogan for us; it’s how we keep commercial customers coming back building after building.
Repair or Replace: Which Costs Less in the Long Run?
For most commercial doors in good structural shape, repair and rekey is the cheaper path – often $200 to $500 for a small office versus double or triple that to swap every lockset. Replacing makes sense when the hardware is failing, the door is being upgraded to a higher security tier, or the current locks are so worn that repair costs approach replacement. Our rule of thumb: if the cylinder and latch are sound, rekey. If the mechanism is grinding, sticking, or the door won’t secure reliably, replace. A quick assessment settles it, and we’ll tell you honestly which side of that line your door sits on.
FAQs – Commercial Locksmith Cost in Arlington
How much does a commercial lockout cost in Arlington?
A business-hours commercial lockout in Arlington typically runs $95 to $200, and after-hours or weekend calls land around $150 to $350. The exact figure depends on the lock type and time of day. Call (877) 626-0257 for a free quote before we dispatch – no surprise charges.
Is it cheaper to rekey or replace commercial locks?
Rekeying is cheaper in almost every case – roughly $25 to $60 per cylinder versus $150 to $450 per door for new locksets. Rekey when the hardware is sound and you just need to reset access. Replace when the mechanism is failing or you’re moving up to a high-security tier like Medeco or Abloy. Call us and we’ll help you decide which is right for your Arlington property.
How much does a master key system cost for a small Arlington office?
A master key system for a small office generally runs $600 to $2,400, scaling with the number of doors and keyholders. It includes cutting and coding keys, documenting the hierarchy, and installing or rekeying the cylinders. For an exact figure on your building, call (877) 626-0257 – estimates are free.
How much do high-security commercial locks cost in Arlington?
High-security hardware from Medeco, Mul-T-Lock, or Abloy typically costs $350 to $1,100 per door installed, including restricted keys. That premium buys pick- and bump-resistant cylinders and key control you can actually enforce. It’s a specialty of ours, not a sideline – call for a free estimate tailored to your doors.
Can you come out today for a commercial lock problem in Arlington?
In most cases, yes – emergency locksmith response is a core part of what we do, and same-day service is common for Arlington businesses. Call (877) 626-0257 and we’ll tell you the soonest we can be there and what it will cost before we head out.
Why Arlington Businesses Call Stalwart
We work across the full hardware range – from Kwikset and Schlage on everyday entry doors up to Baldwin, Sargent, Medeco, Mul-T-Lock, and Abloy on high-security systems. Most locksmiths carry one tier; we’re certified across all eight, which means we quote what your building actually needs instead of what happens to be in the van. One company handles your automotive, emergency, and commercial security work: your car, your home, your business, one locksmith. No referrals, no handoffs, no coordinating three vendors when a door fails at the wrong moment.
Built for the moment it can’t wait – that’s the promise behind the name. When a lockout stalls your business or a rekey needs to happen before new tenants move in, you want a steady professional who knows the hardware cold, not a low-bid gamble. That’s the standard we hold on every Arlington job, whether it’s a single deadbolt or a full building master key system.
Ready for a real number? Call (877) 626-0257 for a free commercial locksmith estimate in Arlington. We’ll assess your doors, quote a clear range, and get the work done right the first time.
Pricing reflects the Arlington market as of 2026. Stalwart Locksmith offers free estimates – call (877) 626-0257.
What Our Customers Say
"Programmed a transponder key for a 2014 model that the dealership wanted an absurd amount for. Same key, fraction of the price, took him twenty minutes in my driveway."
— Heather Anderson"Does good work. Card payment was a bit of a production, so have another option handy."
— Tyrone Coleman"Locked out at eleven at night with a kid asleep in the car. He was there in 25 minutes, had the door open in under two, and did not do the thing where the price goes up once he's standing in front of you."
— Danielle Mercer